概述/GENERAL INFORMATION

NASYN合成潤滑油取得了壓縮機潤滑油技術的突破。NASYN ‘SP’系列半合成壓縮機潤滑油是用經過深度加工的高純度半合成第三類基礎油與獨特的高效復合添加劑調配而成。與礦物油相比具有超強的性能表現并能與礦物油及PAO為基礎油的壓縮機油相容，并且價格合理。是一種理想的取代礦物油高性能價格比的半合成壓縮機潤滑油。

From the makers of NASYN Synthetic Lubricants comes a breakthrough in compressor lubricant technology.  The NASYN SP Series compressor lubricants are semi-synthetic compressor lubricants formulated from semi-synergistic & highly purified group III base fluids coupled with a unique, new, high performance additive package that gives the superior performance of synthetic oils. They are compatible with mineral and PAO oils. Nasyn SP series are ideal products to replace mineral compressor oils with cost-effectiveness

適用范圍/APPLICATIONS

l         油浴旋轉螺桿式和葉片式壓縮機                 需要抗氧化潤滑油的其他用途

Oil flooded rotary screw vane compressors       Other applications requiring and oxidation resistant lubricant

l         離心式壓縮機                                 正常工作溫度范圍：-20°C到180°C

Centrifugal compressors                        Normal operating Temperature range: -20°C to 180°C

特點/CHARACTERISTICS

l         高的抗氧化和熱穩定性                         能極好地控制沉淀和淤泥

High oxidative and thermal stability              Superb deposit and sludge control

l         更高的系統運作溫度和更低的起動溫度          單位工作時間更低的潤滑油費用

Higher system operating temperatures           Lower fluid cost per operating hour

l         and lower start temperature                    換油次數更少, 延長排放間隔

減少維修和部件費用                           Fewer oil changes, extend drain intervals

l         Reduced maintenance and parts costs          與礦物油和適用于礦物油的橡膠相容

                                             Compatible with mineral oils and elastomers

common to mineral oil systems

典型參數/TYPICAL PROPERTIES:

相容性/COMPATIBILITY: NASYN公司的烴基潤滑油在和油漆、密封、墊圈和軟管的相容性方面與礦物油相似。在將礦物潤滑油換成NASYN公司的烴基潤滑油時，不需要采取與相容性有關的特殊預防措施。

NASYN hydrocarbon based lubricants are similar to mineral oils in their compatibility with paints, seals, gaskets and hoses. No special precautions related to compatibility are required when changing over from a mineral oil lubricant to an NASYN Company hydrocarbon based lubricant.

公司信息